How to Set Up a Wireless Microphone to a PA System-wireless microphone|headset microphone|lapel microphone|wired microphone

	FAQ
	Technology report
	Download

　How to Set Up a Wireless Microphone to a PA System

A public address (PA) system consists of loudspeakers and an amplifier with a built-in mixer. You can connect microphones to the amplifier for use with the PA system. The problem with this setup is you need to run a cable between the microphone and the amplifier, and, over long distances, this can require an extremely long cable. To eliminate the mess of the cable, you can use a wireless microphone system.

Instructions
1 Insert the male end of an XLR cable to the output jack on the back of the wireless receiver.

2 Connect the female end of the XLR cable to an available input on the amplifier/mixer of the PA system.

3 Turn on the PA system, then turn on the wireless receiver.

4 Turn on the wireless microphone.